Difference between revisions of "M6A1"

From War Thunder Wiki
Jump to: navigation, search
m (Main armament: Max stab speed M6A1)
(Added About template)
 
(26 intermediate revisions by 10 users not shown)
Line 1: Line 1:
 +
{{About
 +
| about = American heavy tank '''{{PAGENAME}}'''
 +
| usage = other versions
 +
| link = M6 Heavy (Family)
 +
}}
 
{{Specs-Card
 
{{Specs-Card
 
|code=us_m6a1
 
|code=us_m6a1
|images={{Specs-Card-Image|GarageImage_{{PAGENAME}}.jpg}}
+
|images={{Specs-Card-Image|GarageImage_{{PAGENAME}}.jpg|ArtImage_{{PAGENAME}}.png}}
 
}}
 
}}
  
 
== Description ==
 
== Description ==
 
<!-- ''In the description, the first part should be about the history of the creation and combat usage of the vehicle, as well as its key features. In the second part, tell the reader about the ground vehicle in the game. Insert a screenshot of the vehicle, so that if the novice player does not remember the vehicle by name, he will immediately understand what kind of vehicle the article is talking about.'' -->
 
<!-- ''In the description, the first part should be about the history of the creation and combat usage of the vehicle, as well as its key features. In the second part, tell the reader about the ground vehicle in the game. Insert a screenshot of the vehicle, so that if the novice player does not remember the vehicle by name, he will immediately understand what kind of vehicle the article is talking about.'' -->
The '''{{Specs|name}}''' is a rank {{Specs|rank}} American heavy tank {{Battle-rating}}. It was one of the first American tanks to be released with the American ground tree in [[Update 1.45 "Steel Generals"]]. A rather unusual tank design mounting two cannons in the turret, however, it has a durable frontal armour for the battle rating it occupies.
 
  
The M6A1 is one of the most unique tanks in the game, with its large hull and being as tall as a Tiger I. Another interesting feature is that it is one of the most manoeuvrable heavy tanks in the game with a powerful Wright G-200 engine (the same engine powering the [[B-17E|B-17 ''Flying Fortress'' bomber]]) with a max speed of 35 km/h, making it very mobile in a battle situation. The tank has two 12.7 mm's in the hull which are effective for taking out lightly armored vehicles such SPAAs. The M6A1 is one of the first American tanks as well in the game to have the transmission at the rear of the tank.
+
In response to World War II breaking out across the Atlantic, the US decided to develop a new 50-ton heavy tank for their army, designated as ''T1''. The design utilized a turret that held two cannons, a 3-inch tank gun and a 37 mm gun mounted side-by-side. Further development on the type of transmission to use with the heavy tank culminated with the ''T1E2'' cast construction variant that utilized a torque converter transmission design was selected for standardization as the [[M6 Heavy (Family)|M6 heavy tank]], with a second variant ''T1E3'' with the same transmission that was constructed by welding was selected as the '''M6A1''. A total of 40 tanks from the M6 family were assembled, 12 of which were the M6A1 variant. However, by the time these heavy tanks were ready for mass production, the U.S. Army had lost interest in them, considering the M4 Sherman as a better solution in terms of reliability and cost-effectiveness.
  
Something to keep in mind is the shell arc of the secondary 37 mm cannon. Its shell will usually hit the same spot on distances up to 1400 m (~1 mile). But do not forget that the gun is offset to the left in close combat, or it will not hit the target.
+
Introduced with the release of the American ground tree in [[Update 1.45 "Steel Generals"]], the M6A1 is a pretty unique tank in the US tech tree due to the dual-armament configuration in the turret. The tank has two 12.7 mm MGs in the hull which are effective for taking out lightly armoured vehicles such SPAAs. It is a large tank, but can be quite mobile due to the use of a powerful Wright G-200 engine (the same engine powering the [[B-17E|B-17 ''Flying Fortress'' bomber]]) to propel it through a battlefield. Despite its in-game role as a heavy tank, the large size, mediocre mobility, and questionable armour for a heavy tank makes the M6A1 more well suited for second-line combat roles. Additionally, its slow reverse speed limits its ability to quickly retreat to cover when necessary.
  
 
== General info ==
 
== General info ==
Line 25: Line 29:
 
! Armour !! Front (Slope angle) !! Sides !! Rear !! Roof
 
! Armour !! Front (Slope angle) !! Sides !! Rear !! Roof
 
|-
 
|-
| Hull || 82.5 mm (5-35°) ''Front'' <br> 101.6 mm (5-35°) ''Transmission''|| 44.4 mm || 44.4 mm || 25.4 mm
+
| Hull || 82.5 mm (5-35°) ''Front'' <br>101.6 mm (5-35°) ''Transmission''|| 44.4 mm || 41.4 mm || 25.4 mm
 
|-
 
|-
| Turret || 250 mm (6-65°) ''Turret front'' <br> 50.8 + 50.8 mm (7-62°) ''Gun mantlet'' || 82.5 mm (0-12°) || 82.5 mm (0-68°) || 25.4 mm
+
| Turret || 101.6 mm (5-65°) ''Turret front'' <br>50.8 + 50.8 mm (5-65°) ''Gun mantlet'' || 82.5 mm (0-12°) || 82.5 mm (0-68°) || 25.4 mm
 
|-
 
|-
! Armour !! Sides !! Roof
+
| Cupola || 82.5 mm || 82.5 mm
|-
+
|82.5 mm
| Cupola || 82.5 mm || 25.4 mm
+
|25.4 mm
 
|-
 
|-
 
|}
 
|}
Line 38: Line 42:
 
* Suspension wheels are 15 mm thick while tracks are 17 mm thick.
 
* Suspension wheels are 15 mm thick while tracks are 17 mm thick.
 
* Frontal armour plate is unevenly curved for better ricochet chances and efficient armour thickness.
 
* Frontal armour plate is unevenly curved for better ricochet chances and efficient armour thickness.
* Side skirts are 25 mm thick rolled homogeneous armour and will trigger fuses on APHE projectiles. In most cases, APHE shells set off before reaching the main hull and destroying the ammo stack beneath. Still, both skirts and hull are not sturdy enough to withstand a regular AP shell.
+
* Side skirts are 25 mm thick rolled homogeneous armour and will trigger fuses on APHE projectiles. In most cases, APHE shells set off before reaching the main hull and destroying the ammo stack beneath. Still, both skirts and hull are not sturdy enough to withstand a regular AP shell.
  
 
=== Mobility ===
 
=== Mobility ===
Line 65: Line 69:
 
|-
 
|-
 
! ''Arcade''
 
! ''Arcade''
| rowspan="2" | 75 || rowspan="2" | -10°/+30° || rowspan="2" | ±180° || rowspan="2" | Vertical max 24km/h || 14.57 || 20.16 || 24.48 || 27.07 || 28.80 || rowspan="2" | 7.67 || rowspan="2" | 6.79 || rowspan="2" | 6.25 || rowspan="2" | 5.90
+
| rowspan="2" | 75 || rowspan="2" | -10°/+30° || rowspan="2" | ±180° || rowspan="2" | {{Annotation|Vertical|up to 24 km/h}} || 14.57 || 20.16 || 24.48 || 27.07 || 28.80 || rowspan="2" | 7.67 || rowspan="2" | 6.79 || rowspan="2" | 6.25 || rowspan="2" | 5.90
 
|-
 
|-
 
! ''Realistic''
 
! ''Realistic''
Line 73: Line 77:
  
 
==== Ammunition ====
 
==== Ammunition ====
{| class="wikitable sortable" style="text-align:center" width="100%"
+
{{:M7 (76 mm)/Ammunition|M62 shell, M42A1 shell, M79 shot}}
! colspan="8" | Penetration statistics
 
|-
 
! rowspan="2" data-sort-type="text" | Ammunition
 
! rowspan="2" | Type of<br>warhead
 
! colspan="6" | '''Penetration @ 0° Angle of Attack (mm)'''
 
|-
 
! 10 m !! 100 m !! 500 m !! 1,000 m !! 1,500 m !! 2,000 m
 
|-
 
| M62 shell || APCBC || 149 || 146 || 133 || 119 || 106 || 95
 
|-
 
| M42A1 shell || HE || 7 || 7 || 7 || 7 || 7 || 7
 
|-
 
| M79 shot || AP || 134 || 132 || 121 || 109 || 99 || 89
 
|-
 
|}
 
{| class="wikitable sortable" style="text-align:center" width="100%"
 
! colspan="10" | Shell details
 
|-
 
! rowspan="2" data-sort-type="text" | Ammunition
 
! rowspan="2" | Type of<br>warhead
 
! rowspan="2" | Velocity<br>(m/s)
 
! rowspan="2" | Projectile<br>Mass (kg)
 
! rowspan="2" | Fuse delay<br>(m)
 
! rowspan="2" | Fuse sensitivity<br>(mm)
 
! rowspan="2" | Explosive Mass<br>(TNT equivalent) (g)
 
! colspan="3" | Ricochet
 
|-
 
! 0% !! 50% !! 100%
 
|-
 
| M62 shell || APCBC || 792 || 7.00 || 1.2 || 14.0 || 63.7 || 48° || 63° || 71°
 
|-
 
| M42A1 shell || HE || 800 || 5.84 || 0.1 || 0.5 || 390 || 79° || 80° || 81°
 
|-
 
| M79 shot || AP || 792 || 6.80 || N/A || N/A || N/A || 47° || 60° || 65°
 
|-
 
|}
 
  
 
==== [[Ammo racks]] ====
 
==== [[Ammo racks]] ====
 
[[File:Ammoracks_{{PAGENAME}}.png|right|thumb|x250px|[[Ammo racks]] of the {{PAGENAME}}]]
 
[[File:Ammoracks_{{PAGENAME}}.png|right|thumb|x250px|[[Ammo racks]] of the {{PAGENAME}}]]
 +
<!-- '''Last updated: 2.27.2.27''' -->
 
{| class="wikitable" style="text-align:center"
 
{| class="wikitable" style="text-align:center"
 
|-
 
|-
Line 121: Line 90:
 
! Visual<br>discrepancy
 
! Visual<br>discrepancy
 
|-
 
|-
| '''75''' || 40&nbsp;''(+35)'' || 4&nbsp;''(+71)'' || 1&nbsp;''(+74)'' || Yes
+
| '''75''' || 49&nbsp;''(+36)'' || 4&nbsp;''(+71)'' || 1&nbsp;''(+74)'' || No
 
|-
 
|-
 
|}
 
|}
 +
'''Note''':
 +
 +
* As they are modelled by sets of 3 or 4, shells disappear from the rack once you've fired all shells in the set.
 +
{{Clear}}
  
 
=== Additional armament ===
 
=== Additional armament ===
Line 137: Line 110:
 
! Stock !! Full !! Expert !! Aced
 
! Stock !! Full !! Expert !! Aced
 
|-
 
|-
| 202 || N/A || N/A || Vertical || 3.77 || 3.33 || 3.07 || 2.90
+
| 202 || N/A || N/A || {{Annotation|Vertical|up to 24 km/h}} || 3.77 || 3.33 || 3.07 || 2.90
 
|-
 
|-
 
|}
 
|}
  
 
==== Ammunition ====
 
==== Ammunition ====
{| class="wikitable sortable" style="text-align:center" width="100%"
+
{{:M3 (37 mm)/Ammunition|M74B1, M63 shell, M51B1}}
! colspan="8" | Penetration statistics
 
|-
 
! rowspan="2" data-sort-type="text" | Ammunition
 
! rowspan="2" | Type of<br>warhead
 
! colspan="6" | '''Penetration @ 0° Angle of Attack (mm)'''
 
|-
 
! 10 m !! 100 m !! 500 m !! 1,000 m !! 1,500 m !! 2,000 m
 
|-
 
| M74B1 || AP || 79 || 76 || 65 || 54 || 45 || 37
 
|-
 
| M63 shell || HE || 3 || 3 || 3 || 3 || 3 || 3
 
|-
 
| M51B1/B2 || APCBC || 87 || 84 || 73 || 60 || 50 || 41
 
|-
 
|}
 
{| class="wikitable sortable" style="text-align:center" width="100%"
 
! colspan="10" | Shell details
 
|-
 
! rowspan="2" data-sort-type="text" | Ammunition
 
! rowspan="2" | Type of<br>warhead
 
! rowspan="2" | Velocity<br>(m/s)
 
! rowspan="2" | Projectile<br>Mass (kg)
 
! rowspan="2" | Fuse delay<br>(m)
 
! rowspan="2" | Fuse sensitivity<br>(mm)
 
! rowspan="2" | Explosive Mass<br>(TNT equivalent) (g)
 
! colspan="3" | Ricochet
 
|-
 
! 0% !! 50% !! 100%
 
|-
 
| M74B1 || AP || 883 || 0.87 || N/A || N/A || N/A || 47° || 60° || 65°
 
|-
 
| M63 shell || HE || 807 || 0.73 || 0.1 || 0.5 || 38 || 79° || 80° || 81°
 
|-
 
| M51B1/B2 || APCBC || 883 || 0.87 || N/A || N/A || N/A || 48° || 63° || 71°
 
|-
 
|}
 
  
 
==== [[Ammo racks]] ====
 
==== [[Ammo racks]] ====
 
[[File:Ammoracks_{{PAGENAME}}.png|right|thumb|x250px|[[Ammo racks]] of the {{PAGENAME}}]]
 
[[File:Ammoracks_{{PAGENAME}}.png|right|thumb|x250px|[[Ammo racks]] of the {{PAGENAME}}]]
 +
<!-- '''Last updated: 2.27.2.27''' -->
 
{| class="wikitable" style="text-align:center"
 
{| class="wikitable" style="text-align:center"
 
|-
 
|-
Line 190: Line 128:
 
! 4th<br>rack empty
 
! 4th<br>rack empty
 
! 5th<br>rack empty
 
! 5th<br>rack empty
! 6th<br>rack empty
 
 
! Visual<br>discrepancy
 
! Visual<br>discrepancy
 
|-
 
|-
| '''202''' ||190 (+12)|| 161&nbsp;''(+41)'' || 121&nbsp;''(+81)'' || 81&nbsp;''(+121)'' || 41&nbsp;''(+161)'' || 1&nbsp;''(+201)'' || Yes
+
| '''202''' || 160&nbsp;''(+42)'' || 120&nbsp;''(+82)'' || 80&nbsp;''(+122)'' || 40&nbsp;''(+162)'' || 1&nbsp;''(+201)'' || No
 
|-
 
|-
 
|}
 
|}
 +
'''Notes''':
 +
 +
* Ammunition is modelled as 5 boxes of 40 or 41 shells.
 +
* Boxes disappear once you've fired all shells in the rack.
 +
{{Clear}}
  
 
=== Machine guns ===
 
=== Machine guns ===
 
{{Specs-Tank-Weapon|3}}
 
{{Specs-Tank-Weapon|3}}
 
{{Specs-Tank-Weapon|4}}
 
{{Specs-Tank-Weapon|4}}
{{Specs-Tank-Weapon|5}}
 
 
<!-- ''Offensive and anti-aircraft machine guns not only allow you to fight some aircraft but also are effective against lightly armoured vehicles. Evaluate machine guns and give recommendations on its use.'' -->
 
<!-- ''Offensive and anti-aircraft machine guns not only allow you to fight some aircraft but also are effective against lightly armoured vehicles. Evaluate machine guns and give recommendations on its use.'' -->
 
{{main|M2HB (12.7 mm)}}
 
{{main|M2HB (12.7 mm)}}
Line 220: Line 161:
 
== Usage in battles ==
 
== Usage in battles ==
 
<!-- ''Describe the tactics of playing in the vehicle, the features of using vehicles in the team and advice on tactics. Refrain from creating a "guide" - do not impose a single point of view but instead give the reader food for thought. Describe the most dangerous enemies and give recommendations on fighting them. If necessary, note the specifics of the game in different modes (AB, RB, SB).'' -->
 
<!-- ''Describe the tactics of playing in the vehicle, the features of using vehicles in the team and advice on tactics. Refrain from creating a "guide" - do not impose a single point of view but instead give the reader food for thought. Describe the most dangerous enemies and give recommendations on fighting them. If necessary, note the specifics of the game in different modes (AB, RB, SB).'' -->
Although this is a heavy tank, and able to bounce some shells, its armour will not protect it from all incoming fire. Enemies to specifically watch out for are the [[IS-1]], [[Panther tank (Family)|Panthers]], [[Tiger E|Tigers]], and [[M4A3E2|Jumbo]] Shermans, as they can all easily penetrate this vehicle's weak frontal armour. Make sure to protect the rear flank too: M6A1's engine is very large and prone to catching on fire when hit.
+
Although this is a heavy tank, and able to bounce some shells, its armour will not protect it from all incoming fire. Enemies to specifically watch out for are the [[IS-1]], [[Panther tank (Family)|Panthers]], [[Tiger E|Tigers]], and [[M4A3E2]] Shermans, as they can all easily penetrate this vehicle's weak frontal armour. Make sure to protect the rear flank too: M6A1's engine is very large and prone to catching on fire when hit.
  
But despite the imperfect armour layout, the M6A1 does bring an impressive cannon to the battle. The powerful 76 mm gun is able to penetrate the front of most Rank III tanks and can destroy most enemy targets in a single shot. The secondary cannon is weaker than the 76 mm, but can be effective. When engaging targets from the side, this smaller gun should have no trouble penetrating and destroying an enemy unit. And as with all multi-gun tanks, the secondary gun should be fired separately from the main cannon to maximize efficiency and facilitate aim. By firing the secondary cannon, it is occasionally possible to bait the enemy into advancing out of cover and revealing a weak-spot--they will not expect that you have another shell loaded in the main gun. Additionally, the vehicle mounts three 12.7 mm machine guns, which can be very effective in dealing with enemy aircraft if positioned correctly.
+
But despite the imperfect armour layout, the M6A1 does bring an impressive cannon to the battle. The powerful 76 mm gun is able to penetrate the front of most Rank III tanks and can destroy most enemy targets in a single shot. The secondary cannon is weaker than the 76 mm, but can be effective. When engaging targets from the side, this smaller gun should have no trouble penetrating and destroying an enemy unit. And as with all multi-gun tanks, the secondary gun should be fired separately from the main cannon to maximize efficiency and facilitate aim. By firing the secondary cannon, it is occasionally possible to bait the enemy into advancing out of cover and revealing a weak spot. They will not expect that you have another shell loaded in the main gun. Additionally, the vehicle mounts three 12.7 mm machine guns, which can be very effective in dealing with enemy aircraft if positioned correctly.
  
In most situations, the M6A1 driver will find that a slower play-style suits this tank best. The vehicle is large, turret rotation is slow, and enemies will be eager to flank it. As such, the support of teammates is necessary for an effective attack. In a defensive situation, the M6A1 is effective when located behind a ridge or other cover. This will help to obscure the tank's large profile and allow the player to ambush advancing enemies.
+
In most situations, the M6A1 driver will find that a slower play-style suits this tank best. The vehicle is large, turret rotation is slow, and enemies will be eager to flank it. As such, the support of teammates is necessary for an effective attack. In a defensive situation, the M6A1 is effective when located behind a ridge or other cover. This will help to obscure the tank's large profile and allow the player to ambush advancing enemies.
  
The M6A1 is often compared to the M4A3E2 Jumbo Sherman. Although less armoured than its higher-tiered counterpart, the M6A1 is arguably better than the Jumbo during the early game and at range. While the M4A3E2 may have trouble dealing with enemy heavy tanks such as the [[KV-1 (Family)|KV-1]], this vehicle is very-well suited for engaging those targets. The M6A1 may be thought of as a Jumbo Sherman that was traded some of its armour protection in exchange for a more lethal armament.
+
The M6A1 is often compared to the M4A3E2 Jumbo Sherman. Although less armoured than its higher-tiered counterpart, the M6A1 is arguably better than the Jumbo during the early game and at range. While the M4A3E2 may have trouble dealing with enemy heavy tanks such as the [[KV-1 (Family)|KV-1]], this vehicle is very-well suited for engaging those targets. The M6A1 may be thought of as a Jumbo Sherman that was traded some of its armour protection in exchange for a more lethal armament.
  
 
=== Pros and cons ===
 
=== Pros and cons ===
Line 233: Line 174:
 
'''Pros:'''
 
'''Pros:'''
  
* Great main 76 mm gun and ammunition capable of consistent 1 hit kills
+
* Great main 76 mm gun and ammunition capable of knocking out tanks with a single shot
 
* Great secondary 37 mm gun with good reload speed and decent penetration
 
* Great secondary 37 mm gun with good reload speed and decent penetration
 
* Good gun depression
 
* Good gun depression
* Reload rate isn't generally affected when losing crew members
 
 
* Has .50 cal AA machine gun, as well as a dual-mount .50 cal in front
 
* Has .50 cal AA machine gun, as well as a dual-mount .50 cal in front
 
* First standard heavy tank in the US tree, which can dish out and take punishment equally
 
* First standard heavy tank in the US tree, which can dish out and take punishment equally
Line 260: Line 200:
 
<!-- ''Describe the history of the creation and combat usage of the vehicle in more detail than in the introduction. If the historical reference turns out to be too long, take it to a separate article, taking a link to the article about the vehicle and adding a block "/History" (example: <nowiki>https://wiki.warthunder.com/(Vehicle-name)/History</nowiki>) and add a link to it here using the <code>main</code> template. Be sure to reference text and sources by using <code><nowiki><ref></ref></nowiki></code>, as well as adding them at the end of the article with <code><nowiki><references /></nowiki></code>. This section may also include the vehicle's dev blog entry (if applicable) and the in-game encyclopedia description (under <code><nowiki>=== In-game description ===</nowiki></code>, also if applicable).'' -->
 
<!-- ''Describe the history of the creation and combat usage of the vehicle in more detail than in the introduction. If the historical reference turns out to be too long, take it to a separate article, taking a link to the article about the vehicle and adding a block "/History" (example: <nowiki>https://wiki.warthunder.com/(Vehicle-name)/History</nowiki>) and add a link to it here using the <code>main</code> template. Be sure to reference text and sources by using <code><nowiki><ref></ref></nowiki></code>, as well as adding them at the end of the article with <code><nowiki><references /></nowiki></code>. This section may also include the vehicle's dev blog entry (if applicable) and the in-game encyclopedia description (under <code><nowiki>=== In-game description ===</nowiki></code>, also if applicable).'' -->
 
===Development===
 
===Development===
When World War II broke out, limited development in the United States meant that the military possessed very few tanks and so development hastened and eventually gave them tanks such as the [[M3 Lee|M3 Lee]] and [[M4|M4 Sherman]]. On May 20, 1940, the US Army Ordinance Corps began to work on a 50-ton heavy tank for their army. Initially, it was going to have a multi-turret design, two turrets with the 75 mm gun and one secondary turret with a 37 mm gun with a coaxial machine gun, then one more with a 20 mm gun with coaxial. Plus, four .30 cal machine guns were to be put on ball mounts on the front glacis and rear corners of the hull. This project was approved on June 11, 1940, and moved on as the ''Heavy Tank T1''. However at the same time, similar concepts in Europe of heavy breakthrough tanks such as the Soviet [[T-35]] and the German [[Nb.Fz.|Neubaufahrzeug]] tanks were falling out of favour due to lack of combat effectiveness and unfavourable performance for their cost, and the US did the same in October so the design was changed.
+
When World War II broke out, limited development in the United States meant that the military possessed very few tanks and so development hastened and eventually gave them tanks such as the [[M3 Lee|M3 Lee]] and [[M4|M4 Sherman]]. On May 20, 1940, the US Army Ordnance Corps began to work on a 50-ton heavy tank for their army. Initially, it was going to have a multi-turret design, two turrets with the 75 mm gun and one secondary turret with a 37 mm gun with a coaxial machine gun, then one more with a 20 mm gun with coaxial. Plus, four .30 cal machine guns were to be put on ball mounts on the front glacis and rear corners of the hull. This project was approved on June 11, 1940, and moved on as the ''Heavy Tank T1''. However at the same time, similar concepts in Europe of heavy breakthrough tanks such as the Soviet [[T-35]] and the German [[Nb.Fz.|Neubaufahrzeug]] tanks were falling out of favour due to lack of combat effectiveness and unfavourable performance for their cost, and the US did the same in October so the design was changed.
 +
[[File:M6 Heavy Tank of 1941.jpg|right|x250px|thumb|none|A Heavy Tank M6 compared to a US soldier, note the cast hull construction.]]
  
The tank now had one turret with a 3-inch (76.2 mm) gun alongside a coaxial 37 mm gun. The turret housed three crew members and was powered by an electrical traverse system. The commander's cupola was copied from the M3 Lee, featuring a hatch with it sown machine gun. Two .50 cal machine guns now protruded from the bow mount (fired by bow gunner) and two .30 cal machine guns as well (fired by the driver). The entire tank held six crew members, the commander, gunner, driver, assistant driver, loader #1, and loader #2. While the construction of the vehicle was feasible, the engine was not enough to power the vehicle reliably due to heavy 57-ton weight.
+
The tank now had one turret with a [[M7 (76 mm)|3-inch (76.2 mm) gun]] alongside a [[M3 (37 mm)|coaxial 37 mm gun]]. The turret housed three crew members and was powered by an electrical traverse system. The commander's cupola was copied from the M3 Lee, featuring a hatch with it sown machine gun. Two .50 cal machine guns now protruded from the bow mount (fired by bow gunner) and two .30 cal machine guns as well (fired by the driver). The entire tank held six crew members, the commander, gunner, driver, assistant driver, loader #1, and loader #2. While the construction of the vehicle was feasible, the engine was not enough to power the vehicle reliably due to heavy 57-ton weight.
  
In 1941 to 1942, three prototypes were constructed with the different transmission, one with electrical and the rest with a torque converter. The ones with the torque converters were designated the '''Heavy Tank M6''' and '''M6A1'''. The electrical transmission design designated '''M6A2''', was never approved by Ordinance, but was to be manufactured anyway. It was hoped that 115 of these tanks could be built for further testing and production started in December 1942 with design changes. The commander's cupola now featured a regular hatch rather than the machine gun one, which was removed along with one of the machine gun in the front hull. By the time the M6 was ready for production, the Army was moving forward and interest waned on these heavy tanks with the [[M4|M4 Sherman's]] performance in the war. The M6's armour was only slightly thicker than the Sherman's and the 3-inch gun didn't offer too much improvement over the 75 mm gun, plus it had a large profile and low ergonomics, not to mention mechanical issues.
+
In 1941 to 1942, three prototypes were constructed with the different transmission, one with electrical and the rest with a torque converter. The ones with the torque converters were designated the '''Heavy Tank M6''' and '''M6A1''', with the M6A1 differing from a welded hull construction. The electrical transmission design, designated '''M6A2''', was never approved by Ordnance, but was to be manufactured anyway. It was hoped that 115 of these tanks could be built for further testing and production started in December 1942 with design changes. The commander's cupola now featured a regular hatch rather than the machine gun one, which was removed along with one of the machine gun in the front hull. By the time the M6 was ready for production, the Army was moving forward and interest waned on these heavy tanks with the [[M4]] Sherman's performance in the war. The M6's armour was only slightly thicker than the Sherman's and the 3-inch gun didn't offer too much improvement over the 75 mm gun, plus it had a large profile and low ergonomics, not to mention mechanical issues.
  
 
===Production and cancellation===
 
===Production and cancellation===
 +
[[File:M6A1_heavy_tank_TM9-2800_p122.jpg|left|x250px|thumb|none|A M6A1 heavy tank, its hull armour is now welded.]]
 
In early 1942, the M6 production was set for 250 a month but was cut down in September from 5,000 to a mere 100 when manufacturing focus moved to planes. By the end of 1942, Sherman's performance in the war proved its role in the war was more adaptable than the M6 heavy tank while remaining cheaper and lighter for transportation and supplying. This caused the M6 production to lower even more to just 40, before being shut down. Though testing with a 90 mm gun found the M6 to be a good gun mount, the poor layout of the tank restricted it, and the project was shut down before further development could be made.
 
In early 1942, the M6 production was set for 250 a month but was cut down in September from 5,000 to a mere 100 when manufacturing focus moved to planes. By the end of 1942, Sherman's performance in the war proved its role in the war was more adaptable than the M6 heavy tank while remaining cheaper and lighter for transportation and supplying. This caused the M6 production to lower even more to just 40, before being shut down. Though testing with a 90 mm gun found the M6 to be a good gun mount, the poor layout of the tank restricted it, and the project was shut down before further development could be made.
  
In August 1944, the Ordinance Corps planned to modify some of the M6 heavy tanks with more armour and heavier armament to breach fortified areas. These were to be the '''M6A2E1''' and weighed 77 tons with a 190 mm front armour and a 105 mm gun. Eisenhower rejected these as impractical and cancelled it. The M6 was found to be obsolete by December 1944 with only 40 units produced and never seeing combat service. They served as a propaganda piece during the war and were all scrapped after it except one, which is put on display at Aberdeen, Maryland at the United States Army Ordinance Museum. During development, the M6 turret was modified to become the turret for the [[M10 GMC|M10 Tank Destroyer]].
+
In August 1944, the Ordnance Corps planned to modify some of the M6 heavy tanks with more armour and heavier armament to breach fortified areas. These were to be the ''[[M6A2E1]]'' and weighed 77 tons with a 190 mm front armour and a 105 mm gun. Eisenhower rejected these as impractical and cancelled it. The M6 was found to be obsolete by December 1944 with only 40 units produced and never seeing combat service. They served as a propaganda piece during the war and were all scrapped after it except one, which is put on display at Aberdeen, Maryland at the United States Army Ordnance Museum. During development, the M6 turret was modified to become the turret for the [[M10 GMC|M10 Tank Destroyer]].
  
=== In-game description ===
+
{{break}}
At the end of May 1940 the US infantry chief of staff responsible for armor put together requirements for future tanks in light of what was happening in Europe: the German army was relentlessly moving toward France and using armor with great success along the way. The Wehrmacht's use of new Pz.IV tanks with 75 mm guns instantaneously made the American tanks and their 37 mm cannons obsolete.
+
{{Navigation-Start|{{Annotation|Archive of the in-game description|An archive of the historical description of the vehicle that was presented in-game prior to Update 1.55 'Royal Armour'}}}}
 +
{{Navigation-First-Simple-Line}}
 +
At the end of May 1940 the US infantry chief of staff responsible for armour put together requirements for future tanks in light of what was happening in Europe: the German army was relentlessly moving toward France and using armour with great success along the way. The Wehrmacht's use of new Pz.IV tanks with 75 mm guns instantaneously made the American tanks and their 37 mm cannons obsolete.
  
The new tank type had to be heavy (around 50 short tons), with 76 mm and 37 mm cannons arranged side-by-side in the turret. It had four machine guns (two heavy caliber and two rifle caliber), a Wright G-200 engine, a Hydromatic transmission, and a top speed of 25 mph. The green light was given for the construction of four prototypes in February 1941.
+
The new tank type had to be heavy (around 50 short tons), with 76 mm and 37 mm cannons arranged side-by-side in the turret. It had four machine guns (two heavy-calibre and two rifle-calibre), a Wright G-200 engine, a Hydromatic transmission, and a top speed of 25 mph. The green light was given for the construction of four prototypes in February 1941.
  
 
The prototypes developed by the Baldwin Locomotive Works were designed with different transmissions and hulls in the interests of finding the best option for full-scale production. Two modifications at most were permitted, and on April 13, 1942, the T1E2 and T1E3 were standardized as the M6 and M6A1. The latter added a welded hull, Wright G-200 engine, and torque converter to the M6.
 
The prototypes developed by the Baldwin Locomotive Works were designed with different transmissions and hulls in the interests of finding the best option for full-scale production. Two modifications at most were permitted, and on April 13, 1942, the T1E2 and T1E3 were standardized as the M6 and M6A1. The latter added a welded hull, Wright G-200 engine, and torque converter to the M6.
Line 281: Line 225:
  
 
Between 1942 and 1943 the Baldwin Locomotive Works ended up producing 12 M6 heavy tanks. They did not join the army or see combat.
 
Between 1942 and 1943 the Baldwin Locomotive Works ended up producing 12 M6 heavy tanks. They did not join the army or see combat.
 +
{{Navigation-End}}
  
 
== Media ==
 
== Media ==
Line 287: Line 232:
 
;Skins
 
;Skins
  
* [https://live.warthunder.com/feed/camouflages/?vehicleCountry=usa&vehicleType=tank&vehicleClass=heavy_tank&vehicle=us_m6a1 Skins and camouflages for the {{PAGENAME}} from live.warthunder.com.]
+
* [https://live.warthunder.com/feed/camouflages/?vehicle=us_m6a1 Skins and camouflages for the {{PAGENAME}} from live.warthunder.com.]
  
 
;Videos
 
;Videos
{{Youtube-gallery|Yssg5uKGS-A|'''The Shooting Range #236''' - ''Pages of History'' section at 03:39 discusses the {{PAGENAME}}.}}
+
{{Youtube-gallery|Yssg5uKGS-A|'''The Shooting Range #236''' - ''Pages of History'' section at 03:39 discusses the {{PAGENAME}}.|5jWKY14-ZGg|'''How to use secondary cannon if it doesn't penetrate? M6A1''' - ''HowToPlay1337''}}
  
 
== See also ==
 
== See also ==
''Links to the articles on the War Thunder Wiki that you think will be useful for the reader, for example:''
+
<!-- ''Links to the articles on the War Thunder Wiki that you think will be useful for the reader, for example:''
 +
* ''reference to the series of the vehicles;''
 +
* ''links to approximate analogues of other nations and research trees.'' -->
 +
 
 +
;Related development
  
* ''reference to the series of the vehicles;''
+
* [[T1E1]] / M6A2 - Earlier prototype for the M6 Heavy tank program with experimental electrical transmission
* ''links to approximate analogues of other nations and research trees.''
+
* [[M6A2E1]] - Upgunned and uparmoured [[T1E1]]
  
 
== External links ==
 
== External links ==
 
<!-- ''Paste links to sources and external resources, such as:''
 
<!-- ''Paste links to sources and external resources, such as:''
 
* ''topic on the official game forum;''
 
* ''topic on the official game forum;''
* ''encyclopedia page on the tank;''
 
 
* ''other literature.'' -->
 
* ''other literature.'' -->
  
* [[wt:en/news/3209/current/|[Vehicle Profile] Heavy Tank M6A1]]
+
* [[wt:en/news/3209--en|[Vehicle Profile] Heavy Tank M6A1]]
  
 +
{{TankManufacturer Ordnance Department}}
 
{{USA heavy tanks}}
 
{{USA heavy tanks}}

Latest revision as of 21:22, 7 November 2024

Introducing Wiki 3.0
This page is about the American heavy tank M6A1. For other versions, see M6 Heavy (Family).
M6A1
us_m6a1.png
GarageImage M6A1.jpg
ArtImage M6A1.png
M6A1
AB RB SB
4.7 5.0 5.0
Class:
Research:26 000 Specs-Card-Exp.png
Purchase:76 000 Specs-Card-Lion.png

Description

In response to World War II breaking out across the Atlantic, the US decided to develop a new 50-ton heavy tank for their army, designated as T1. The design utilized a turret that held two cannons, a 3-inch tank gun and a 37 mm gun mounted side-by-side. Further development on the type of transmission to use with the heavy tank culminated with the T1E2 cast construction variant that utilized a torque converter transmission design was selected for standardization as the M6 heavy tank, with a second variant T1E3 with the same transmission that was constructed by welding was selected as the 'M6A1. A total of 40 tanks from the M6 family were assembled, 12 of which were the M6A1 variant. However, by the time these heavy tanks were ready for mass production, the U.S. Army had lost interest in them, considering the M4 Sherman as a better solution in terms of reliability and cost-effectiveness.

Introduced with the release of the American ground tree in Update 1.45 "Steel Generals", the M6A1 is a pretty unique tank in the US tech tree due to the dual-armament configuration in the turret. The tank has two 12.7 mm MGs in the hull which are effective for taking out lightly armoured vehicles such SPAAs. It is a large tank, but can be quite mobile due to the use of a powerful Wright G-200 engine (the same engine powering the B-17 Flying Fortress bomber) to propel it through a battlefield. Despite its in-game role as a heavy tank, the large size, mediocre mobility, and questionable armour for a heavy tank makes the M6A1 more well suited for second-line combat roles. Additionally, its slow reverse speed limits its ability to quickly retreat to cover when necessary.

General info

Survivability and armour

Armourfront / side / back
Hull101 / 69 / 44
Turret101 / 82 / 82
Crew6 people
Visibility122 %

Armour type:

  • Cast homogeneous armour (Front, Transmission area, Turret)
  • Rolled homogeneous armour (Front, Side, Rear, Roof)
Armour Front (Slope angle) Sides Rear Roof
Hull 82.5 mm (5-35°) Front
101.6 mm (5-35°) Transmission
44.4 mm 41.4 mm 25.4 mm
Turret 101.6 mm (5-65°) Turret front
50.8 + 50.8 mm (5-65°) Gun mantlet
82.5 mm (0-12°) 82.5 mm (0-68°) 25.4 mm
Cupola 82.5 mm 82.5 mm 82.5 mm 25.4 mm

Notes:

  • Suspension wheels are 15 mm thick while tracks are 17 mm thick.
  • Frontal armour plate is unevenly curved for better ricochet chances and efficient armour thickness.
  • Side skirts are 25 mm thick rolled homogeneous armour and will trigger fuses on APHE projectiles. In most cases, APHE shells set off before reaching the main hull and destroying the ammo stack beneath. Still, both skirts and hull are not sturdy enough to withstand a regular AP shell.

Mobility

Speedforward / back
AB38 / 5 km/h
RB and SB36 / 5 km/h
Number of gears6 forward
1 back
Weight56.8 t
Engine power
AB1 526 hp
RB and SB800 hp
Power-to-weight ratio
AB26.9 hp/t
RB and SB14.1 hp/t
Game Mode Max Speed (km/h) Weight (tons) Engine power (horsepower) Power-to-weight ratio (hp/ton)
Forward Reverse Stock Upgraded Stock Upgraded
Arcade 38 5 56.8 1,033 1,526 18.19 26.87
Realistic 36 5 708 800 12.46 14.08

Modifications and economy

Repair costBasic → Reference
AB1 373 → 1 698 Sl icon.png
RB1 507 → 1 864 Sl icon.png
SB2 101 → 2 598 Sl icon.png
Total cost of modifications24 600 Rp icon.png
44 800 Sl icon.png
Talisman cost1 100 Ge icon.png
Crew training22 000 Sl icon.png
Experts76 000 Sl icon.png
Aces400 Ge icon.png
Research Aces320 000 Rp icon.png
Reward for battleAB / RB / SB
70 / 110 / 130 % Sl icon.png
142 / 142 / 142 % Rp icon.png
Modifications
Mobility Protection Firepower
Mods new tank traks.png
Tracks
Research:
1 200 Rp icon.png
Cost:
2 200 Sl icon.png
90 Ge icon.png
Mods new tank suspension.png
Suspension
Research:
1 100 Rp icon.png
Cost:
2 000 Sl icon.png
85 Ge icon.png
Mods new tank break.png
Brake System
Research:
1 100 Rp icon.png
Cost:
2 000 Sl icon.png
85 Ge icon.png
Mods new tank filter.png
Filters
Research:
2 100 Rp icon.png
Cost:
3 800 Sl icon.png
160 Ge icon.png
Mods new tank transmission.png
Transmission
Research:
4 000 Rp icon.png
Cost:
7 300 Sl icon.png
300 Ge icon.png
Mods new tank engine.png
Engine
Research:
4 000 Rp icon.png
Cost:
7 300 Sl icon.png
300 Ge icon.png
Mods tank tool kit.png
Improved Parts
Research:
1 200 Rp icon.png
Cost:
2 200 Sl icon.png
90 Ge icon.png
Mods extinguisher.png
Improved FPE
Research:
1 100 Rp icon.png
Cost:
2 000 Sl icon.png
85 Ge icon.png
Mods tank reinforcement us.png
Crew Replenishment
Research:
2 100 Rp icon.png
Cost:
3 800 Sl icon.png
160 Ge icon.png
Mods new tank horizontal aiming.png
Horizontal Drive
Research:
1 200 Rp icon.png
Cost:
2 200 Sl icon.png
90 Ge icon.png
Mods tank ammo.png
37mm_usa_m3_APC_ammo_pack
Research:
1 200 Rp icon.png
Cost:
2 200 Sl icon.png
90 Ge icon.png
Mods tank cannon.png
Adjustment of Fire
Research:
1 100 Rp icon.png
Cost:
2 000 Sl icon.png
85 Ge icon.png
Mods tank ammo.png
76mm_usa_M79_AP_ammo_pack
Research:
1 100 Rp icon.png
Cost:
2 000 Sl icon.png
85 Ge icon.png
Mods new tank vertical aiming.png
Elevation Mechanism
Research:
2 100 Rp icon.png
Cost:
3 800 Sl icon.png
160 Ge icon.png

Armaments

Main armament

Vertical stabilizer
Reduces the swing of the gun in one plane while moving
Ammunition75 rounds
Reloadbasic crew → aces
7.6 → 5.9 s
Vertical guidance-10° / 30°
Main article: M7 (76 mm)
76 mm M7 Turret rotation speed (°/s) Reloading rate (seconds)
Mode Capacity Vertical Horizontal Stabilizer Stock Upgraded Full Expert Aced Stock Full Expert Aced
Arcade 75 -10°/+30° ±180° Vertical 14.57 20.16 24.48 27.07 28.80 7.67 6.79 6.25 5.90
Realistic 10.71 12.60 15.30 16.92 18.00

Ammunition

Penetration statistics
Ammunition Type of
warhead
Penetration @ 0° Angle of Attack (mm)
10 m 100 m 500 m 1,000 m 1,500 m 2,000 m
M62 shell APCBC 149 146 133 119 106 94
M42A1 shell HE 17 16 15 13 12 10
M79 shot AP 134 132 121 109 99 89
Shell details
Ammunition Type of
warhead
Velocity
(m/s)
Projectile
mass (kg)
Fuse delay
(m)
Fuse sensitivity
(mm)
Explosive mass
(TNT equivalent) (g)
Ricochet
0% 50% 100%
M62 shell APCBC 792 7 1.2 14 63.7 48° 63° 71°
M42A1 shell HE 853 5.84 0.2 0.1 390 79° 80° 81°
M79 shot AP 792 6.8 - - - 47° 60° 65°

Ammo racks

Ammo racks of the M6A1
Full
ammo
1st
rack empty
2nd
rack empty
3rd
rack empty
Visual
discrepancy
75 49 (+36) (+71) (+74) No

Note:

  • As they are modelled by sets of 3 or 4, shells disappear from the rack once you've fired all shells in the set.

Additional armament

Vertical stabilizer
Reduces the swing of the gun in one plane while moving
Ammunition202 rounds
Reloadbasic crew → aces
3.7 → 2.9 s
Main article: M3 (37 mm)
37 mm M3 Reloading rate (seconds)
Capacity Vertical Horizontal Stabilizer Stock Full Expert Aced
202 N/A N/A Vertical 3.77 3.33 3.07 2.90

Ammunition

Penetration statistics
Ammunition Type of
warhead
Penetration @ 0° Angle of Attack (mm)
10 m 100 m 500 m 1,000 m 1,500 m 2,000 m
M74B1 AP 79 76 65 54 45 37
M63 shell SAPHEI 32 31 26 21 16 13
M51B1 APCBC 87 84 73 60 50 41
Shell details
Ammunition Type of
warhead
Velocity
(m/s)
Projectile
mass (kg)
Fuse delay
(m)
Fuse sensitivity
(mm)
Explosive mass
(TNT equivalent) (g)
Ricochet
0% 50% 100%
M74B1 AP 883 0.87 - - - 47° 60° 65°
M63 shell SAPHEI 792 0.73 1.2 9 38 79° 80° 81°
M51B1 APCBC 883 0.87 - - - 48° 63° 71°

Ammo racks

Ammo racks of the M6A1
Full
ammo
1st
rack empty
2nd
rack empty
3rd
rack empty
4th
rack empty
5th
rack empty
Visual
discrepancy
202 160 (+42) 120 (+82) 80 (+122) 40 (+162) (+201) No

Notes:

  • Ammunition is modelled as 5 boxes of 40 or 41 shells.
  • Boxes disappear once you've fired all shells in the rack.

Machine guns

Ammunition1 000 rounds
Belt capacity200 rounds
Reloadbasic crew → aces
10.4 → 8.0 s
Fire rate575 shots/min
Vertical guidance-10° / 22°
Horizontal guidance-120° / 120°
Ammunition6 000 rounds
Belt capacity200 rounds
Reloadbasic crew → aces
10.4 → 8.0 s
Fire rate575 shots/min
Vertical guidance-10° / 35°
Main article: M2HB (12.7 mm)
12.7 mm M2HB
Mount Capacity (Belt) Fire rate Vertical Horizontal
Pintle 1,000 (200) 577 -10°/+50° ±120°
Hull 3,000 (200) 577 -10°/+35° ±15°
Hull 3,000 (200) 577 -10°/+35° ±15°

Usage in battles

Although this is a heavy tank, and able to bounce some shells, its armour will not protect it from all incoming fire. Enemies to specifically watch out for are the IS-1, Panthers, Tigers, and M4A3E2 Shermans, as they can all easily penetrate this vehicle's weak frontal armour. Make sure to protect the rear flank too: M6A1's engine is very large and prone to catching on fire when hit.

But despite the imperfect armour layout, the M6A1 does bring an impressive cannon to the battle. The powerful 76 mm gun is able to penetrate the front of most Rank III tanks and can destroy most enemy targets in a single shot. The secondary cannon is weaker than the 76 mm, but can be effective. When engaging targets from the side, this smaller gun should have no trouble penetrating and destroying an enemy unit. And as with all multi-gun tanks, the secondary gun should be fired separately from the main cannon to maximize efficiency and facilitate aim. By firing the secondary cannon, it is occasionally possible to bait the enemy into advancing out of cover and revealing a weak spot. They will not expect that you have another shell loaded in the main gun. Additionally, the vehicle mounts three 12.7 mm machine guns, which can be very effective in dealing with enemy aircraft if positioned correctly.

In most situations, the M6A1 driver will find that a slower play-style suits this tank best. The vehicle is large, turret rotation is slow, and enemies will be eager to flank it. As such, the support of teammates is necessary for an effective attack. In a defensive situation, the M6A1 is effective when located behind a ridge or other cover. This will help to obscure the tank's large profile and allow the player to ambush advancing enemies.

The M6A1 is often compared to the M4A3E2 Jumbo Sherman. Although less armoured than its higher-tiered counterpart, the M6A1 is arguably better than the Jumbo during the early game and at range. While the M4A3E2 may have trouble dealing with enemy heavy tanks such as the KV-1, this vehicle is very-well suited for engaging those targets. The M6A1 may be thought of as a Jumbo Sherman that was traded some of its armour protection in exchange for a more lethal armament.

Pros and cons

Pros:

  • Great main 76 mm gun and ammunition capable of knocking out tanks with a single shot
  • Great secondary 37 mm gun with good reload speed and decent penetration
  • Good gun depression
  • Has .50 cal AA machine gun, as well as a dual-mount .50 cal in front
  • First standard heavy tank in the US tree, which can dish out and take punishment equally
  • Lower portion of the hull sides are protected by additional 25.4 mm armour sheet
  • Adequate roof armour of 25 mm means aerial strafing will be of a little issue without large-calibre weaponry
  • Rear mounted transmission means it is not affected with a frontal penetration
  • Big hull increases the chance of surviving after a penetrating hit
  • Good acceleration and power-to-weight ratio
  • Good hill-climbing abilities
  • Very good cross country performance due to large tracks

Cons:

  • Lots of weak points, such as gun mantlet, upper side armour, driver port, MG port, and front armour cheeks
  • Armour profile overall is quite flat, no angling benefits
  • Ammo is stored in the lower side armour
  • All automotive module mounted in the rear, easily prone to damage, set ablaze, or exploded when shot
  • Slow top speed
  • Mediocre turn speed
  • Pretty large in general, will stand out in the battlefield

History

Development

When World War II broke out, limited development in the United States meant that the military possessed very few tanks and so development hastened and eventually gave them tanks such as the M3 Lee and M4 Sherman. On May 20, 1940, the US Army Ordnance Corps began to work on a 50-ton heavy tank for their army. Initially, it was going to have a multi-turret design, two turrets with the 75 mm gun and one secondary turret with a 37 mm gun with a coaxial machine gun, then one more with a 20 mm gun with coaxial. Plus, four .30 cal machine guns were to be put on ball mounts on the front glacis and rear corners of the hull. This project was approved on June 11, 1940, and moved on as the Heavy Tank T1. However at the same time, similar concepts in Europe of heavy breakthrough tanks such as the Soviet T-35 and the German Neubaufahrzeug tanks were falling out of favour due to lack of combat effectiveness and unfavourable performance for their cost, and the US did the same in October so the design was changed.

A Heavy Tank M6 compared to a US soldier, note the cast hull construction.

The tank now had one turret with a 3-inch (76.2 mm) gun alongside a coaxial 37 mm gun. The turret housed three crew members and was powered by an electrical traverse system. The commander's cupola was copied from the M3 Lee, featuring a hatch with it sown machine gun. Two .50 cal machine guns now protruded from the bow mount (fired by bow gunner) and two .30 cal machine guns as well (fired by the driver). The entire tank held six crew members, the commander, gunner, driver, assistant driver, loader #1, and loader #2. While the construction of the vehicle was feasible, the engine was not enough to power the vehicle reliably due to heavy 57-ton weight.

In 1941 to 1942, three prototypes were constructed with the different transmission, one with electrical and the rest with a torque converter. The ones with the torque converters were designated the Heavy Tank M6 and M6A1, with the M6A1 differing from a welded hull construction. The electrical transmission design, designated M6A2, was never approved by Ordnance, but was to be manufactured anyway. It was hoped that 115 of these tanks could be built for further testing and production started in December 1942 with design changes. The commander's cupola now featured a regular hatch rather than the machine gun one, which was removed along with one of the machine gun in the front hull. By the time the M6 was ready for production, the Army was moving forward and interest waned on these heavy tanks with the M4 Sherman's performance in the war. The M6's armour was only slightly thicker than the Sherman's and the 3-inch gun didn't offer too much improvement over the 75 mm gun, plus it had a large profile and low ergonomics, not to mention mechanical issues.

Production and cancellation

A M6A1 heavy tank, its hull armour is now welded.

In early 1942, the M6 production was set for 250 a month but was cut down in September from 5,000 to a mere 100 when manufacturing focus moved to planes. By the end of 1942, Sherman's performance in the war proved its role in the war was more adaptable than the M6 heavy tank while remaining cheaper and lighter for transportation and supplying. This caused the M6 production to lower even more to just 40, before being shut down. Though testing with a 90 mm gun found the M6 to be a good gun mount, the poor layout of the tank restricted it, and the project was shut down before further development could be made.

In August 1944, the Ordnance Corps planned to modify some of the M6 heavy tanks with more armour and heavier armament to breach fortified areas. These were to be the M6A2E1 and weighed 77 tons with a 190 mm front armour and a 105 mm gun. Eisenhower rejected these as impractical and cancelled it. The M6 was found to be obsolete by December 1944 with only 40 units produced and never seeing combat service. They served as a propaganda piece during the war and were all scrapped after it except one, which is put on display at Aberdeen, Maryland at the United States Army Ordnance Museum. During development, the M6 turret was modified to become the turret for the M10 Tank Destroyer.


Archive of the in-game description

At the end of May 1940 the US infantry chief of staff responsible for armour put together requirements for future tanks in light of what was happening in Europe: the German army was relentlessly moving toward France and using armour with great success along the way. The Wehrmacht's use of new Pz.IV tanks with 75 mm guns instantaneously made the American tanks and their 37 mm cannons obsolete.

The new tank type had to be heavy (around 50 short tons), with 76 mm and 37 mm cannons arranged side-by-side in the turret. It had four machine guns (two heavy-calibre and two rifle-calibre), a Wright G-200 engine, a Hydromatic transmission, and a top speed of 25 mph. The green light was given for the construction of four prototypes in February 1941.

The prototypes developed by the Baldwin Locomotive Works were designed with different transmissions and hulls in the interests of finding the best option for full-scale production. Two modifications at most were permitted, and on April 13, 1942, the T1E2 and T1E3 were standardized as the M6 and M6A1. The latter added a welded hull, Wright G-200 engine, and torque converter to the M6.

Mass production was scheduled for November 1942, though a report by General Jacob Devers on December 7 indicated that the M6s would enjoy only limited tactical use due to their size. Moreover, two M4s equipped with 75 mm and 76 mm weapons could be built in place of two heavy tanks. As a result, the Armored Corps hurried to revoke the contract.

Between 1942 and 1943 the Baldwin Locomotive Works ended up producing 12 M6 heavy tanks. They did not join the army or see combat.


Media

Skins
Videos

See also

Related development
  • T1E1 / M6A2 - Earlier prototype for the M6 Heavy tank program with experimental electrical transmission
  • M6A2E1 - Upgunned and uparmoured T1E1

External links


U.S. Army Ordnance Department/Corps*
Light tanks  T18E2 · M24 (Designed in collaboration with Cadillac)
M3 Stuart  M3 · M3A1 Stuart · M3A1 (USMC)
M5 Stuart  M5A1
Medium tanks  M3 Lee
M4 Sherman  M4 · M4A1 · M4A2 · M4A3 (105) · Calliope
  M4A1 (76) W · M4A2 (76) W · M4A3 (76) W
M26 Pershing  T20 · T25 · M26 · M26E1 · M26 T99
Patton Series  M46 · M46 "Tiger" · M47
Prototypes  T54E1 · T95E1
Heavy tanks  M103
M4 Jumbo  M4A3E2 · Cobra King · M4A3E2 (76) W
M6 Heavy  M6A1 · M6A2E1 · T1E1
M26 Pershing  T26E1-1 · T26E5
Prototypes  T14
T29  T29 · T30 · T34
T-32  T32 · T32E1
Tank destroyers  M3 GMC · M10 GMC · M56
M8 GMC  M8 HMC · M8A1 GMC
M36 GMC  M36 GMC · M36B2
Prototypes  T28 · T95
SPAAGs 
Production  M19 MGMC · M42
Export/Captured  ␗M8 HMC · SU-57
Stuart  Stuart I · Stuart III · ␗M3A3 Stuart · ␗M3A3 (1st PTG) · ▄M3A3 · ▄M3A3 Stuart · ▃Stuart VI (5th CAD) · ␗M5A1
Lee/Grant  ▂M3 Medium · ▃Grant I · Grant I
M4 Sherman  Sherman II · ▄M4A1 · ␗M4A1 (75) W · ▀M4 748 (a) · ▂M4A2 · ▄M4A3 (105) · ▅M4A3 (76) W · ▄M4A3E2
  ␗M4A4 · ␗M4A4 (1st PTG) · ▄Sherman V · ▄M4A4 · ▄Sherman I Composito
M26 Pershing  M26 "D.C.Ariete" · M26A1
M47 Patton  mKPz M47 G · ▅M47
M10 GMC  ␗M10 GMC · ▄M10 GMC
M36 GMC  ␗M36 GMC · M36B1 · ▅M36 · ▄M36B2
M19 MGMC  ▅M19A1
M42 MGMC  ▅M42 · ␗M42
  *The Ordnance Department was renamed to the Ordnance Corps after the Army Reorganization Act of 1950.

USA heavy tanks
M4 Jumbo  M4A3E2 · Cobra King · M4A3E2 (76) W
M6  M6A1 · T1E1 · T1E1 (90) · M6A2E1
T26  T26E1-1 · T26E5
T29/30/34  T29 · T30 · T34
T32  T32 · T32E1
M103  M103
Others  T14