T-55AM-1

T-55AM-1

T-55AM-1

USSR

VI Rank

Battle rating:

AB	RB	SB
8.7	8.7	8.7

Class:

PREMIUM

Medium tank

Purchase:Bundle or Gift

STORE

Description

The T-55AM-1 is a premium gift rank VI Soviet medium tank with a battle rating of 8.7 (AB/RB/SB). It was introduced in Update 1.81 "The Valkyries".

General info

Survivability and armour

The T-55, which this tank was based upon, used exclusively rolled homogeneous armour, which proved to useless against advanced chemical warheads. The Soviet Union, in an attempt to modernize and extend the service life of the T-55, conceived the AM-1 upgrade kit for the tank. The upgrade kit consists bolted-on blocks of metal-polymer plates, which are essentially plates of metal sandwiching polymer fillings. This solution was cheap and easy to implement, though its effectiveness was debatable. Compared to the original T-55A, the armour protection was greatly improved, but still prove to be insufficient against certain weapons.

The turret cheeks are fitted with the add-on metal-polymer blocks, which grants immunity to every HEAT warhead in-game except the HOT missiles. The Leopard's 120mm HEAT-FS occasionally penetrates the cheeks, and in that case, very minimal damage is caused. The turret armour against APDS is highly effective, given that the projectile impacts the add-on armour. However, the armour is mostly useless against APFSDS, and in case of penetration, will cause extensive damage. The add-on armour on the upper front plate is somewhat effective as it can nullify HEAT warheads with less than 450mm penetration. Most APFSDS will seamlessly penetrate the hull. Most APDS will bounce.

Do note that the gun breech area is very poorly protected by some 200mm of cast homogeneous armour, making its protection worth absolutely useless against everything. So do try to angle your turret by facing your cheeks. When doing so, use the right side of your turret to "catch" rounds, as even if it penetrates, only your loader will be knocked out, so no big deal.

Also note that the add-on armor block can be blown off your tank. For example, HOT missiles will have very high chance of taking off armor, and direct hit from artillery shell (assuming it hits the armor and doesn't destroy you) will take off the armor.

In regards to ammo storage, your ready rack is stored within your fuel tank. This wet ammo storage will prevent ammo detonation from HEAT, but a well placed APFSDS will nonetheless cause ammo cook-off.

Armour type:

• Rolled homogeneous armour (Hull, Turret roof)
• Cast homogeneous armour (Turret, Gun mantlet)
• Structural steel (Stowage boxes, Track mud guards)
• Rubber-fabric screens (Track sides)

Armour	Front	Sides	Rear	Roof
Hull	100* mm (59°) Front glacis  100 mm (56°) Lower glacis	80 mm	45 mm (16°) Upper  20 mm (71°) Lower	30 mm 20 mm Hatches 45 mm Engine grille
Turret	130-200* mm (0-75°)	90-160 mm (9-62°)	66 mm (4-41°)	30 mm
Cupola	100 mm (conical) Base 30 mm (spherical) Hatch			100 mm (conical) Base 30 mm (spherical) Hatch

Notes:

• Suspensions wheels and tracks are 20 mm thick
• Front belly armour is 20 + 20 mm thick, with the rest of the belly armour being just 20 mm thick.
• * - Composite armour present

Mobility

Game Mode	Max Speed (km/h)		Weight (tons)	Engine power (horsepower)		Power-to-weight ratio (hp/ton)
	Forward	Reverse		Stock	Upgraded	Stock	Upgraded
Arcade	56	9	41.5	1,069	1,316	25.76	31.71
Realistic	51	8		610	690	14.7	16.63

The mobility is only bested by the XM-1. It will out-run most, if not all, its friendlies and adversaries. Its pivoting capabilities are comparable to the very capable neutral steering system on the Leopard L/44. The tank will reach around 30-40 km/h off-road, and -10 km/h in reverse. The so-called "stabilized" gun is only operable reliably under 35km/h.

Armaments

Main armament

The 100mm rifled gun seems like an oddity at this BR, not in its calibre or whatnot, but its unparalleled versatility. The gun can fire APDS, APFSDS, HEAT-FS, HE, APHE, ATGM and smoke. In fact, it can fire every type of munition available in-game with the exception of HESH. Though very versatile, it is quite useless as the APDS, APFSDS and HEAT-FS are terribly under-performing compared to its adversaries. The only offensive munition worth carrying is the APHE and ATGM. The APHE (APCBC) is extremely capable. It will destroy most bad guys your face with one shot, given proper shot placement and successful penetration. At this rank, most your opponents are poorly armoured, like the Leopard 1, MBT/KPz-70 and XM-1, so the 200mm penetration on the APHE will penetrate and will result in the instant destruction of your enemies.

100 mm D-10T2S					Turret rotation speed (°/s)					Reloading rate (seconds)
Mode	Capacity	Vertical	Horizontal	Stabilizer	Stock	Upgraded	Full	Expert	Aced	Stock	Full	Expert	Aced
Arcade	42	-5°/+16°	±180°	Two-plane	14.28	19.76	24.00	26.55	28.24	11.05	9.78	9.01	8.50
Realistic					8.92	10.50	12.75	14.10	15.00

Ammunition

Penetration statistics
Ammunition	Type of warhead	Penetration @ 0° Angle of Attack (mm)
		10 m	100 m	500 m	1,000 m	1,500 m	2,000 m
3BM-8	APDS	299	298	291	272	253	249
BR-412D	APCBC	239	236	223	207	192	178
3BM25	APFSDS	335	330	307	290	275	260
3BK17M	HEATFS	390	390	390	390	390	390
OF-412	HE	19	19	19	19	19	19
9M117	ATGM	600	600	600	600	600	600

Shell details
Ammunition	Type of warhead	Velocity (m/s)	Projectile Mass (kg)	Fuse delay (m)	Fuse sensitivity (mm)	Explosive Mass (TNT equivalent) (g)	Ricochet
							0%	50%	100%
3BM-8	APDS	1,415	4.13	N/A	N/A	N/A	75°	78°	80°
BR-412D	APCBC	887	15.9	1.2	19	93.94	48°	63°	71°
3BM25	APFSDS	1,430	3.4	N/A	N/A	N/A	76°	77°	80°
3BK17M	HEATFS	1,085	9.96	0.05	1	1,440	65°	72°	77°
OF-412	HE	900	15.6	0.1	0.5	1,460	79°	80°	81°
9M117	ATGM	370	18.8	0	0.1	3,000	80°	82°	90°

Smoke shell characteristics
Ammunition	Velocity (m/s)	Projectile Mass (kg)	Screen radius (m)	Screen deploy time (s)	Screen hold time (s)	Explosive Mass (TNT equivalent) (g)
3D3	880	15.6	20	5	25	272

Ammo racks

Ammo racks of the T-55AM-1

Full ammo	1st rack empty	2nd rack empty	3rd rack empty	4th rack empty	5th rack empty	6th rack empty	Visual discrepancy
42	41 (+1)	37 (+5)	33 (+9)	21 (+21)	19 (+23)	1 (+41)	No

• Rack 6 is a first-stage ammo rack

Machine guns

12.7 mm DShK
Mount	Capacity (Belt)	Fire rate	Vertical	Horizontal
Pintle	300 (50)	600	-10°/+60°	±180°

7.62 mm PKT
Mount	Capacity (Belt)	Fire rate	Vertical	Horizontal
Coaxial	3,000 (250)	700	N/A	N/A

Usage in battles

The T-55AM-1 is a tank that T-55A users are familiar with, but now with extra features such as:

• The ammo option of a gun-launched 9M117 missile
• Composite armour added to the front of the hull and turret
• More powerful engine
• Smoke grenades availability

Aside from these differences, the usage of the T-55AM-1 will be quite similar to any T-54/55 tank models in the Soviet tech tree.

Offensive

Using the T-55AM-1 in the offensive role is ideal given the technical characteristics of the tank. The relatively low profile construction of the tank, plus the added composite armour at the front, can make the T-55AM-1 more likely to survive a contested battlefield. The stabilised 100 mm gun also gives a nice, steady field of view at selected enemy target to engage while moving. However, one should take care not to be hit as despite the composite armour additions to the tank, they only have significant effect against chemical rounds (with an effective protection of around 450 mm), and its effect on kinetic rounds is negligible enough that even APDS rounds on certain tanks can pierce the hull at closer ranges.

When moving towards the enemy, try to utilise the terrain for cover to protect the vulnerable parts of the hull. Only the front have the added composite armour so make sure these are presented so to maximize survival should the T-55AM-1 be hit. Avoid traveling over hills when moving, as the -5 degree gun depression restricts the T-55AM-1's firing arc. Focus on going around obstacles in a manner that the gun can be brought to bear while eliminating any possible exposure of the side armour. The gun should always be pointed where the enemy is expected to be coming, as the traverse speed is slow and can be detrimental when reacting to a surprise encounter.

For the attack, the T-55AM-1 should try not to be in the lead due to the spotty armour design, but it should follow a squad where a lead tank attracts the enemy gun fire, and the T-55AM-1 supports the lead tank by firing at its opposition while repositioning to a good firing angle. The higher mobility of the T-55AM-1 also means the tank could also attempt a wide flanking manoeuvre around the battlefield and hit the enemy's sides.

Defence

Defence can be done with the T-55AM-1, though the options are limited as it is difficult to take up ideal hull-down positions due to both the -5 degree gun depression and weaker turret armour even with the composite (although the gun mantlet may cause incoming shells to ricochet at the cost of the gun modules). The ideal way to use the T-55AM-1 in the defensive is to hide behind larger covers such as buildings and wait for the enemy to attempt to cross into the 100 mm gun's path. The variety of ammunition available allows the T-55AM-1 to deal with a variety of enemy threats, such as an APCBC-HE round to penetrate and explode behind delicate side armour, and the 9M117 missile for longer-ranged targets.

No matter the case, the most important aspect to consider when choosing a cover position to fire from is how fast the T-55AM-1 can acquire and fire at targets, as the turret's slow traverse rate and the gun's rather slow reload rate can mean a significant amount of down time if shot is missed and the enemy continues speeding down the firing line. Also be wary of enemies that are aware of the T-55AM-1's position and attempt to root it out via flanking or aerial attacks, so keep an exit strategy to quickly egress from the area.

Modules

Tier	Mobility		Protection	Firepower
I	Tracks		Parts	BR-412D	Horizontal Drive	NVD
II	Suspension	Brake System	FPE	3BM25	Adjustment of Fire	Laser rangefinder
III	Filters		Crew Replenishment	3BK17M	Elevation Mechanism	Smoke grenade
IV	Transmission	Engine	ESS	3D3	9M117	Artillery Support
This is a premium vehicle: all modifications are unlocked on purchase

Pros and cons

Pros:

• Access to APFSDS ammunition
• Access to very good AGTM
• One of the few top rank tanks with APHE, great for one shots.
• Favourable matchmaking that won't face top rank tanks
• Respectable mobility
• Decent armour, especially vs chemical Munitions
• Roof Mounted DShK 12.7 mm MG is great for taking out low flying Helicopters
• Wet ammo storage in the front fuel tank may prevent ammo detonation from HEAT
• Due to access to APHE, it can even one-shot Abrams given proper shot placement, making the vehicle an adequate back-up for a top-rank Soviet lineup

Cons:

• Armour is completely ineffective against APFSDS and 120 mm APDS
• Below average reload time, many enemies will have a faster reload
• Poor reverse speed
• The Rheinmetall 120mm's HEAT-FS and most high-penetration ATGM's will go clean through its armor
• Ammo stored all around the Hull, a penetration will most likely result in an ammo detonation
• Rather weak APFSDS
• Doesn't have access to thermal optics

History

Describe the history of the creation and combat usage of the vehicle in more detail than in the introduction. If the historical reference turns out to be too long, take it to a separate article, taking a link to the article about the vehicle and adding a block "/History" (example: https://wiki.warthunder.com/(Vehicle-name)/History) and add a link to it here using the main template. Be sure to reference text and sources by using <ref></ref>, as well as adding them at the end of the article with <references />. This section may also include the vehicle's dev blog entry (if applicable) and the in-game encyclopedia description (under === In-game description ===, also if applicable).

The T-54/55 went on a modernization program in the late 70's and mid 80's, featuring specially an increase combat capacity to fight agaisnt more modern threats which were the main threats to T-55, specially newer ammunition. This set the T-55AM, a major upgrade in all departments, mainy firepower and protection.

Firepower wise:

The T-55AM features the "Volna" Fire Control System, an upgrade to the Gunner Main Purpose Sight, ballistics computer, horizontal and vertical guidance mechanisms. The first modification made to the T-55AM regarding Volna was the addition of the TShSM-32PV GPS. The main difference of the TShSM-32PV with the TSh2B-32P (past sight of the T-55A) is its targetting capabilities. The T-55AM had the 1K13-2 sight, meaning it got missile firing capabilities. This sight was mounted on top of the main gun just above the first portion of the barrel, close to the turret mantlet. Inside, the 1K13-2 was mounted right next to the GPS. This also replaced the TPN-1-22-11 night vision GPS, sight that was used in previous T-54 and 55 models, more specifically T-54B and T-55A. This was a slightly improvement over the TPN-1-22-11 sight as it had greater zooming in day and night mode and enhanced image quality on night mode but since it was not part of the "Volna" FCS, its capabilities were somewhat limited.

The T-55AM also got an improvement ballistics wise, featuring a D-10T2 100mm rifled gun with thermal sleeve and bore extractor, the first cannon of this caliber with this technology fielded in Russian service.

Ammunition wise:

The T-55AM kept the same firing capabilites of the ammunition fired by previous models, including HEF, APCBC, APCR, APDS, HEAT-FS, shrapnel and a new steel core APFSDS-T. Steel core was the most rudimentary and unused core in dart ammunition, primarily due to the fact that it had less density, brittleness and hardness numbers were lower than tungsten carbide. This round is the 3UBM7 round which contained the 3BM19 dart. It is unclear as of why full steel alternatives were made at the time (T-62 also had steel core darts) despite tungsten carbide core darts were fielded like the 3BM20. Strangely enough, the 3BM19 was not tagged as a practice round but a combat round. 3BM19 and 20 shared the same case, propellant, fins, cap, tracer and sabot but different core, for this reason, despite both travelling at the same speed, the penetration capabilities were different as the density of tungsten and steel are significantly different.

Protection wise:

The T-55AM kept the same turret and hull design with its complex range of sloping angles that ensured that the height of the turret had an equal thickness in steel. The cause of this was to withstand full caliber rounds such as APCBC and APCR. The T-55AM features the BDD "Metal-Polymer Armor" (no official name was given). It had what is known as "Brows" (like eye brows) which covered the whole 140° frontal arc of turret and glacis and covered the turret critical components at 30° in a side angle, still less protected. The block had a thickness of 500mm when measured from center (the thickest part of the block including the air gap). If we go in a bottom to top look, it is clear that the armor package starts with a relatively thin armor layer and gradually grows as we go to the top, this is to compensate the turret round shape. At the bottom of the armor block is where the cast turret armor is the thickest but the block is the thinest and gradually increases and decreases in an equal ratio as we move to the top. The block itself was 280mm thick with two different obliquities: at the top half, the armor is angled in a 30°. The bottom half is angled at 15°. This package is also seen in the T-62M although the geometry is different as turret shape varies as well as the air gap between the block and the turret. The presence of an air gap behind the armour array gives room for KE projectiles to break apart as the buildup of internal stresses from the penetration of the steel front plate and the moving internal plates is suddenly released, thus magnifying the effect of the armour. For shaped charge jets, the air gap gives room for disturbed jet particles to disperse such that they do not contribute to the total penetration depth from the residual jet tip.

The hull was also improved with the same type of armor added on top of the standard T-55 frontal plate. It added a 150mm add on BDD plate angled at 60° following the same hull armor obliquity. Due to the increased weight, the T-55AM got multiple upgrades regarding suspension, more in concrete tracks and engine. The OMSh tracks were replaced by the RMSh tracks, shown in the first models of the T-55A which had an internat rubber plate sandwiched between steel plates to increase durability. This made the tracks capable of withstanding more weight and roughness in terrain without loosing traction, sinking or flipping. It kept the same dimenssion of the past OMSh tracks. It also carried a V-55U 420HP engine.

T-55AM-1

The suffix "-1" was added to later models which featured the V-46-5M engine, a derivation from the T-72 engine.

Media

Skins

• Skins and camouflages for the T-55AM-1 from live.warthunder.com.

Videos

T-54/T-55 family discusses the T-55AM-1 at 5:06 - War Thunder Official Channel

Should You Buy The T-55AM-1? - Sako Sniper

Premium Vehicles: T-55AM-1 - War Thunder Wiki

T-55AM-1 - Tank Review - Napalmratte

See also

Links to the articles on the War Thunder Wiki that you think will be useful for the reader, for example:

• reference to the series of the vehicles;
• links to approximate analogues of other nations and research trees.

External links

Paste links to sources and external resources, such as:

• topic on the official game forum;
• encyclopedia page on the tank;
• other literature.