Weapons selector

Description

The weapons selector, introduced in Update "Raining Fire", allows the player to select which of an aircraft's primary and secondary weapons should be used. Once set up, it allows the player to cycle through their primary and secondary weapons, and fire them using the same bound key. This is particularly useful for aircraft with multiple types of air-to-air missiles, as different missiles have very different uses, and without the weapons selector you cannot chose which order to fire the missiles in. The weapons selector is also useful in many other situations; such as for aircraft with multiple types of bombs, allowing you to chose which order to drop your bombs in, or multiple calibres of offensive armament, allowing you to conserve certain ammunition for more important engagements.

Weapons selector is not available for selecting between different armaments on naval or ground units.

Setting up the weapons selector

Read this section carefully, improperly setting up the weapons selector can lead to the inability to use any weapons.

It is critical that you set up the weapons selector correctly or else you may find yourself in a situation where you are unable to use any weaponry on your aircraft. To begin with, familiarise yourself with the following controls:

Weaponry Controls
Control name	Description
Small-calibre guns	These are the key binds you are used to using for your various primary and secondary weapons. Each type of weapon can have its own key bind. You should leave these untouched if you have already set them up. Note: These key binds become inactive when their respective weapon type is not selected while in weapons selector mode. You should leave them bound so you can still use your weapons when the weapons selector is not enabled, and both these keybinds and the general ones set for "Fire primary/secondary weapon" below can be used when the appropriate weapon type is selected in weapons selector mode.
Large-calibre guns
Additional guns
Drop bomb
Fire rocket
Fire air-to-ground missile
Fire air-to-air missile
Switch primary weapons	Cycles through your primary weapons (and enables weapons selector mode).
Switch secondary weapons	Cycles through your secondary weapons (and enables weapons selector mode).
Exit selected weapon mode	Exits weapon selector mode and restores standard key binds to operation.
Fire primary weapon	Fires the selected primary weapon, regardless of what type it is (only works while weapons selector mode is enabled).
Fire secondary weapon	Fires the selected secondary weapon, regardless of what type it is (only works while weapons selector mode is enabled).

To set up the weapons selector, you should first bind the "Fire primary weapon" control. This is the control which will fire your selected primary weapon (usually your guns), so you should bind it to the same key you usually use for your guns (left mouse button by default). Then you should bind the "Fire secondary weapon" control. This is the control which will fire your selected secondary weapon. It is up to you what you bind this to, but it is probably a good idea to use the same key bind as one of your normal secondary weapons (bombs, rockets, missiles, etc.).

After this, bind the "Switch primary weapons" and "Switch secondary weapons" controls. These are the keys you will use to cycle through your primary and secondary weapons, so bind them to something which will be accessible during flight. Finally, bind the "Exit selected weapon mode" control, this will restore the weapon controls mode to the standard mode.

Using the weapons selector

Default activation of the weapons selector mode at the start of a mission can be enabled in the options menu.

Basic theory of operation

The HUD after just turning on the weapons selector. Notice the messages at the bottom of the screen, the ">" symbol next to selected weapon types, and the name of the selected missile being displayed.

The weapons selector can be enabled by pressing either the "Switch primary weapons" or "Switch secondary weapons" key; and can be deactivated by pressing the "Exit selected weapon mode" key. When the weapons selector is activated a number of things will happen.

• A "Weapon selection on" message will appear at the bottom of the screen
• A ">" symbol will appear next to the selected primary and secondary weapon
  • If there is more than one secondary weapon of the same type (e.g. different types of air-to air missiles, or different size bombs), then the name of the selected weapon will also be displayed.

The user interface with the weapons selector enabled can be seen to the right. The 20 mm cannon pod is the Phantom FGR.2's only primary weapon, so it is selected and marked with an ">", it can be fired by pressing the "Fire primary weapon" key. The currently selected secondary weapon is the Skyflash, and so a ">" symbol has appeared next to the AAM label to indicate air-to-air missiles are selected. As there are multiple types of air-to-air missile available (AIM-9G Sidewinders and Skyflashes), the name of the selected weapon has been displayed. The weapon quantity is listed as "8/4": the first number indicates that there are eight air-to-air missiles currently fitted to the aircraft, of which four are Skyflashes (the other four being AIM-9Gs). The Skyflashes can be fired by pressing the "Fire secondary weapon" key.

When the weapons selector is activated all other weapon controls are disabled, this means that (for the example to the right) the Phantom's bombs cannot be dropped using their normal key bind. Instead the bombs must be selected by pressing the "Switch secondary weapons" key until the ">" symbol moves to the bombs (pressing the key will cycle between each available secondary weapon; in this case AIM-9Gs, Skyflashes, 540 lb and 1,000 lb bombs, and SNEB rockets).

Examples

Switching between air-to-air missiles

When an air-to-air missile is selected, pressing the "Fire secondary weapon" key once will activate the seeker, and a second time will fire the missile.

The weapons selector is extremely useful for aircraft which carry a combination of different air-to-air missiles (for example the F-4 Phantom or Mirage IIIC), as the different missiles are optimized for different uses, and without the weapons selector it is not possible to choose which type of missile will be fired.

In the example below, the Phantom FGR.2 is carrying four Skyflashes, four AIM-9G Sidewinders, two 1,000 lb bombs, three 540 lb bombs, and SNEB rockets. Without the weapons selector the player must fire all their Sidewinders before they can fire their Skyflashes, however the bombs and rockets may be dropped at any time using their separate control. The "Switch secondary weapons" key can be pressed to activate the weapons selector and switch between launching the different suspended armaments. As the Phantom FGR.2 only has one primary weapon (the 20 mm gun pod) it is always selected and can be fired by pressing the "Fire primary weapon" key. With the weapons selector active, bombs cannot be dropped independently of the missiles, and must be selected in order to be dropped.

• 

  Weapons selector mode is disabled, all four Sidewinder missiles must be fired before Skyflash missiles can be fired. The bombs and rockets can be used independent of the missiles.

• 

  Weapons selector mode is enabled, with AIM-9G Sidewinders selected.

• 

  Weapons selector mode is enabled, with Skyflashes selected. The Skyflashes can be used without firing the Sidewinders first.

• 

  Weapons selector mode is enabled, with 540 lb bombs selected. The bombs can now be dropped.

Switching between bombs

Another use for the weapons selector is choosing which bombs to drop for aircraft with multiple bombs. In the example below the P-47D-28 would usually have to drop its two 1,000 lb bombs first, however with the weapons selector the 500 lb bomb can be dropped first, if desired. While the weapons selector is active the rockets cannot be fired by pressing the "Fire rocket" key, instead they must be fired by selecting them and pressing the "Fire secondary weapon" key.

• 

  The centreline 500 lb bomb is selected. "3/1" means that of a total of three bombs, one is of the selected type (500 lb AN-M64A1).

• 

  The wing-mounted 1,000 lb bombs are selected. "3/2" means that of a total of three bombs, two are of the selected type (1,000 lb AN-M65A1).

• 

  The HVAR rockets are selected and can be fired by pressing the "Fire secondary weapon" key.

Switching between guns

The weapons selector can also be used to switch between different guns on an aircraft. In the example below, the Spitfire Mk IIb has both 7.7 mm machine guns and 20 mm cannons. The weapons selector can be used to allow either all guns, or the selected guns to be fired with the "Fire primary weapon" key.

• 

  Weapons selector mode is enabled, all guns are being fired by the "Fire primary weapon" key.

• 

  Weapons selector mode is enabled, only the machine guns are being fired by the "Fire primary weapon" key.

• 

  Weapons selector mode is enabled, only the cannons are being fired by the "Fire primary weapon" key.

Media

Videos

Raining Fire Update discusses the weapons selector at 6:03 - War Thunder Official Channel